Up Close & Personal With India’s Reborn Saras Light Aircraft

SARAS PT1N ready for April Low-Speed Taxi Trials

Eight years ago, on 6 March 2009, the second prototype of India’s Saras light civil aircraft crashed near Bengaluru, killing its three-man Indian Air Force test crew. Already beset with technical challenges not uncommon to aviation development, the accident very nearly ended the project. The programme went into an inevitable downward spiral until it veritably departed consciousness, even that of its principal intended customer, the Indian Air Force. The eight year struggle to keep the aircraft project alive has largely remained unknown, with few details emerging from a project that was all but written off. Livefist has now had a chance to interview the new chief of the agency that is fighting to meet a June-July target to get a modified first prototype (See photo) back in the air. In a very candid and wide-ranging interview to Livefist, his first since taking over as director of the National Aerospace Laboratories (CSIR-NAL), Jitendra J. Jadhav provides the first detailed inside view of the Saras’ enormously difficult journey from death, back to life. Our interaction in full:

Why has it taken eight years for the SARAS programme to be in a position to return to flight test?

After the unfortunate accident on 6th March, 2009, all the activities related to SARAS aircraft had to be stopped till completion of accident investigation by DGCA and subsequent implementation of recommendations thereon. The investigation absolved CSIR-NAL of any design deficiencies, but attributed the cause to procedural deficiencies. Other major factors for this delay in resumption of programme were: Change of Regulatory body from DGCA to CEMILAC to meet certification requirements of IAF as the possible launch customer; re-orientation time for CSIR-NAL to the procedures of military certification agency and the time for the regulatory body to get a grasp on the project, as the entry was lateral and at an advanced stage of project. By the time the first prototype was modified and ready for Taxi trials at the end of year 2013, the project had reached its date of completion and CSIR-NAL had to wait for a formal approval from Govt to continue further. This was crucial as the project had important stake holders like HAL, IAF, CEMILAC and DGAQA towards further flight testing and certification of SARAS.

What challenges have been faced by the programme in the last eight years, including the lessons learned from the 2009 accident?

The main challenges faced were / are heavy attrition of trained human resources, obsolescence of critical aircraft systems and LRU’s, vendor reluctance to respond to CSIR-NAL minimal requirements (which is specific to prototype development wherein only one or two systems are built), availability of  experienced Test pilots for twin-turboprop configurations for full project duration, availability of dedicated staff from regulatory body due to their preoccupation in several projects of national importance and fund availability for prototype development activity with inbuilt risk of failures.

SARAS PT1 being modified into SARAS PT1N

What specific changes have been made to the first prototype compared to its earlier configuration?

Major changes made to the first prototype, termed PT1N, are upgrading the propulsive system including efficient nacelle, larger metallic rudder for improved controllability, new landing-gear actuators, new brake system to cater to the needs of higher AUW, improved FCS, flame resistant design for nacelle etc.

What are the flight test/IOC/FOC delivery timelines for the SARAS? Can you share figures of total expenditure on the project so far, plus intended expenditure until delivery to customer.

Shortly, CSIR-NAL will carry out flight-testing and evaluation of PT1N aircraft which will provide essential information towards arriving at aircraft configuration for the subsequent weight optimized build for Limited Series Production. Also the developmental flights of Saras PT1N will lead to evaluation of performance and handling characteristics of the aircraft to fine tune the design modifications. This would further pave the way forward towards arriving at an aircraft which will be suitable to meet the IAF requirements through LSP phase.

Total approved budget for the 10thplan proposal project “Spearheading small civil aircraft design, development and manufacture” is INR 297 crores. It is prudent to mention here that the Human resources created in all aspects of civil aircraft design, prototype manufacturing, development of machining centers across the country which can produce airworthy components, the assets like excellent aircraft hangar, state-of-the-art telemetry centre etc., far outweigh the money spent on the project.

What is the productionisation/manufacturing plan for SARAS — what is the sales/export forecast?

Once the aircraft is mid-way to certification and the final SOP is frozen, an industrial partner will be identified towards productionisation /manufacturing. Initially IAF has shown interest in acquiring 15 aircraft and it is hoped that this could further go up to at least 50.

What new roles are envisaged from the SARAS other than light commute and logistics?

SARAS can also be useful for Air ambulance, Maritime Patrolling, Border surveillance, Commutation for regional connectivity and Special Missions. Apart from these applications, SARAS can be used as an excellent flying test bed for new LRU development and qualification. This is so because of the simple reason that the build of SARAS is totally indigenous and can be updated or modified for LRU testing and qualification.

What is the current status of the National Civil Aircraft (NCA) programme of which NAL is an integral part?

At CSIR-NAL, studies have been carried out regarding developing a Regional Transport Aircraft (RTA). The feasibility study indicated: about 250-300 aircraft for India (20 year demand forecast), international market demand for over 7000 RTA class of aircraft and military transport of this class in India : ~150  aircraft (replacement for An-32 and HS748). The suggested model by the High Power Committee is technology development funding by government and equipping/manufacturing in a JV/SPV mode. Presently, CSIR-NAL is contemplating on Phase 1 of the development (ie.) preliminary design phase (PDP).  It is envisaged that, CSIR-NAL along with public/private partnership can come together to take this initiative forward with the government.

What is the export scenario of NAL aircraft and systems at this time?

CSIR-NAL is planning for 2 seat ab-initio aircraft Hansa – Next Generation with advanced features aimed at low acquisition cost, low operating cost and minimum maintenance. The project once approved and implemented, we envisage the private partner to take up production and marketing not only catering to Indian market but also to other developing countries.

Further, we are in partnership and collaborative mode with M/s Mahindra Aerospace for the development and certification of CNM-5 aircraft both in India and Australia. While the certification of CASA in Australia will be the responsibility M/s Mahindra acquired Gibbs Aerospace, discussion are in progress with Mahindra Aerospace for manufacturing Five Seat General Aviation Aircraft (CNM5) Prototype Leading to FAR 23 Certifications by the Directorate General of Civil Aviation (DGCA) in India. With Indian and Australian certificate in place it would be easy for  us to market the CNM5 aircraft abroad.

1 thought on “Up Close & Personal With India’s Reborn Saras Light Aircraft”

  1. It is sad that an indigenous aircraft has to contend with typical Indian bureaucracy from a multitude of agencies just to fly. On the other hand, foreign planes are bought at the drop of a hat, by taking the word of their certifying agencies on paper.

    Is this “Make in India” or “Copy-paste in India” ? And what happened to “Made in India”, which Saras really is ?

Leave a Reply to Abhiman Cancel Reply

Your email address will not be published. Required fields are marked *


Scroll to Top